Note about shipping: this product will ship using Conway's truck freight service. You will be contacted for your locations actual shipping cost before we charge your credit card. The above shipping cost is only an estimated average.
Cruiser Ramp - Motorcycle / Pick-Up Bed Loader System
The Cruiser Ramp PickUp Loader was designed to be a cost effective way to load and transport a full size motorcycle in the bed of a pickup truck. The Cruiser Ramp system will accommodate all full size pickups. The pickup loader eliminates the use of boards, and backing the vehicle into a ditch to load the motorcycle. Simply drive the motorcycles front wheel into the locking wheel chock on the system platform assembly, tie the front wheel down at the axle position using the supplied ratchet tie-down straps, activate the hand held remote switch and the motorcycle is pulled into the pickup bed. The motorcycle pickup loader is powered by a 3000 pound capacity electric winch with 3/16" wire rope heavy duty cable.
| OVERALL WIDTH | Long or Short Bed Trucks = 41 1/8" |
| OVERALL IN-BED FRAME LENGTH | 5'-6" Long Bed = 65" 6'-6" Long Bed = 73.75" 8' Long Bed = 95.5" |
| SYSTEM WEIGHT | 335 Pounds |
| ELECTRIC WINCH | 3000 Pound Capacity W/ 3/16" Heavy Duty Wire Rope Cable |
| PLATFORM CASTER WHEELS | 6"x2" Black Rubber Wheels with wheel grabbers. |
| MOTORCYCLE WHEEL CHOCK | Locking Wheel Chock. (Ride On-Get Off-Walk Away) |
| OUTSIDE RAMPS | Length = 95.25" Aluminum Ramps |
| REAR TIRE RAMP | Length = 94" Aluminum Ramp with a 1500 Pound Weight Capacity |
| FRONT AXLE TIE-DOWN STRAPS | Ratchet Tie-Down Straps |
| ACTIVATION SWITCH | Handheld Remote Activation Switch W/ 15 Foot Cable. Allows you to be back with, and watch the motorcycle loading and unloading. |
| SAFETY CHAINS | Right and Left Front Safety Chains |
| FRAME FINISH | Black Powder Coat Finish |
| MOTORCYCLE WEIGHT CAPACITY | 1000 Pounds |
| SHIPPING | Shipped via Truck (Shipped Fully Assembled, Ready to Install) System is shipped on a 4' x 8' pallet. Requires the use of a forklift for truck removal. |
| PATENTED | Yes |
- Shipped fully assembled, ready for install into the pick-up bed.
- Choice of pick-up bed lengths.
- Conforms to all full size pick-up beds from 5’-6” to 8’ box lengths and 48” or wider widths between the wheel wells, including step side beds.
- Easy installation and removal from the pick-up bed
- May close the tailgate with the motorcycle removed and the Cruiser Ramp remaining in the pick-up bed.
- Standard Locking Wheel Chock and Axle Ratchet Tie-Downs.
- Black Powder Coat Finish for long lasting appearance.
- Baked on Powder Coat Finish
- 3000-Pound Electric Cable Winch w/ 3/16” Wire Rope Cable.
- Removable, Remote Activation Switch with 15 feet of cable.
- 1000-Pound Motorcycle Capacity.
- Effort Free Motorcycle Removal System
Customer Reviews:
There are yet no reviews for this product.Please log in to write a review.
You may also be interested in this/these product(s)
Retractable Ramp System
$796.99
|
